SV-3000
Winston
Features:
·High efficiency, high reliability
100% full load burn-in test
Protection: Short circuit/ Over load / Over voltage
1 year warranty
SPECIFICATIONS | |||
OUTPUT | |||
Model | SV-3000-24 | SV-3000-48 | SV-3000-110 |
DC Voltage | 24V | 48V | 110V |
Rated Current | 120A | 60.0A | 27.3A |
Current Range | 0-120A | 0-60.0A | 0-27.3A |
Ripple & Noise | 0.50% | 0.50% | 0.50% |
Voltage Adj. Range | 0-24V | 0-48V | 0-110V |
Setup&Rise Time | 100ms,50ms at full load | ||
Hold Up Time | 20ms at full load | ||
INPUT | |||
Voltage Range | AC220V±20% 47~63HZ | ||
AC Current | 3.2A/115V 1.6A/230V | ||
Efficiency | 86% | 87% | 89% |
Inrush Current | 40A/230V | ||
Leakage Current | <0.5MA/230VAC | ||
PROTECTION | |||
Over Load | 110~150% | ||
Protection type: Shut down o/p voltage, re-power on to recover | |||
Over Voltage | 110~150% | ||
Protection type: Shut down o/p voltage, re-power on to recover | |||
SAFETY | |||
Withstand Voltage | I/P-O/P:1.5KVAC/1min I/P-F/G:1.5KVAC/1min | ||
Isolation Resistance | O/P-F/G:0.5KVAC /1min | ||
Weight | 9.5kg/piece | ||
Dimension | 400*220*150mm | ||
NOTE | |||
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
Features:
·High efficiency, high reliability
100% full load burn-in test
Protection: Short circuit/ Over load / Over voltage
Dimensions:300*150*130(mm)
SPECIFICATIONS | ||||||
OUTPUT | ||||||
Model | SV-2000-12 | SV-2000-15 | SV-2000-24 | SV-2000-30 | SV-2000-48 | SV-2000-110 |
DC Voltage | 12V | 15V | 24V | 30V | 48V | 110V |
Rated Current | 166A | 133.0A | 83.3A | 66.0A | 41.6A | 18A |
Current Range | 0-166A | 0-133.0A | 0-83.3A | 0-66.0A | 0-41.6A | 0-18.0A |
Ripple & Noise | 160mV | 180mV | 190mV | 320mV | 400mV | 900mV |
Voltage Adj. Range | 0.50% | 0.50% | 0.50% | 0.50% | 0.50% | 0.50% |
Setup&Rise Time | 100ms,50msat full load | |||||
Hold Up Time | 20ms at full load | |||||
INPUT | ||||||
Voltage Range | AC220V±20% 47~63HZ | |||||
AC Current | 3.2A/115V1.6A/230V | |||||
Efficiency | 86% | 86% | 87% | 87% | 89% | 89% |
Inrush Current | 40A/230V | |||||
Leakage Current | <0.5MA/230VAC | |||||
PROTECTION | ||||||
Over Load | 110~150% | |||||
Protection type: Shut down o/p voltage, re-power on to recover | ||||||
Over Voltage | 110~150% | |||||
Protection type: Shut down o/p voltage, re-power on to recover | ||||||
SAFETY | ||||||
Withstand Voltage | I/P-O/P:1.5KVAC/1min I/P-F/G:1.5KVAC/1min | |||||
Isolation Resistance | O/P-F/G:0.5KVAC /1min | |||||
Gross weight | 6.0kg | |||||
Dimension | 300*150*130mm | |||||
NOTE | ||||||
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. | ||||||
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1μ &47μparallel capacitor. | ||||||
3.Tolerance: includes set up tolerance, line regulation and load regulation | ||||||
4.The power supply is considered a component which will be installed into a final equipment. The final equipment mustbe re-confirmed that it still meets EMC directives. |
Features:
·High efficiency, high reliability
100% full load burn-in test
Protection: Short circuit/ Over load / Over voltage
1 year warranty
SPECIFICATIONS | |||
OUTPUT | |||
Model | SV-3000-24 | SV-3000-48 | SV-3000-110 |
DC Voltage | 24V | 48V | 110V |
Rated Current | 120A | 60.0A | 27.3A |
Current Range | 0-120A | 0-60.0A | 0-27.3A |
Ripple & Noise | 0.50% | 0.50% | 0.50% |
Voltage Adj. Range | 0-24V | 0-48V | 0-110V |
Setup&Rise Time | 100ms,50ms at full load | ||
Hold Up Time | 20ms at full load | ||
INPUT | |||
Voltage Range | AC220V±20% 47~63HZ | ||
AC Current | 3.2A/115V 1.6A/230V | ||
Efficiency | 86% | 87% | 89% |
Inrush Current | 40A/230V | ||
Leakage Current | <0.5MA/230VAC | ||
PROTECTION | |||
Over Load | 110~150% | ||
Protection type: Shut down o/p voltage, re-power on to recover | |||
Over Voltage | 110~150% | ||
Protection type: Shut down o/p voltage, re-power on to recover | |||
SAFETY | |||
Withstand Voltage | I/P-O/P:1.5KVAC/1min I/P-F/G:1.5KVAC/1min | ||
Isolation Resistance | O/P-F/G:0.5KVAC /1min | ||
Weight | 9.5kg/piece | ||
Dimension | 400*220*150mm | ||
NOTE | |||
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
Features:
·High efficiency, high reliability
100% full load burn-in test
Protection: Short circuit/ Over load / Over voltage
Dimensions:300*150*130(mm)
SPECIFICATIONS | ||||||
OUTPUT | ||||||
Model | SV-2000-12 | SV-2000-15 | SV-2000-24 | SV-2000-30 | SV-2000-48 | SV-2000-110 |
DC Voltage | 12V | 15V | 24V | 30V | 48V | 110V |
Rated Current | 166A | 133.0A | 83.3A | 66.0A | 41.6A | 18A |
Current Range | 0-166A | 0-133.0A | 0-83.3A | 0-66.0A | 0-41.6A | 0-18.0A |
Ripple & Noise | 160mV | 180mV | 190mV | 320mV | 400mV | 900mV |
Voltage Adj. Range | 0.50% | 0.50% | 0.50% | 0.50% | 0.50% | 0.50% |
Setup&Rise Time | 100ms,50msat full load | |||||
Hold Up Time | 20ms at full load | |||||
INPUT | ||||||
Voltage Range | AC220V±20% 47~63HZ | |||||
AC Current | 3.2A/115V1.6A/230V | |||||
Efficiency | 86% | 86% | 87% | 87% | 89% | 89% |
Inrush Current | 40A/230V | |||||
Leakage Current | <0.5MA/230VAC | |||||
PROTECTION | ||||||
Over Load | 110~150% | |||||
Protection type: Shut down o/p voltage, re-power on to recover | ||||||
Over Voltage | 110~150% | |||||
Protection type: Shut down o/p voltage, re-power on to recover | ||||||
SAFETY | ||||||
Withstand Voltage | I/P-O/P:1.5KVAC/1min I/P-F/G:1.5KVAC/1min | |||||
Isolation Resistance | O/P-F/G:0.5KVAC /1min | |||||
Gross weight | 6.0kg | |||||
Dimension | 300*150*130mm | |||||
NOTE | ||||||
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. | ||||||
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1μ &47μparallel capacitor. | ||||||
3.Tolerance: includes set up tolerance, line regulation and load regulation | ||||||
4.The power supply is considered a component which will be installed into a final equipment. The final equipment mustbe re-confirmed that it still meets EMC directives. |